Angelo Po 191FAG Manuel D'utilisation Et D'installation page 49

ADJUSTING TOP BURNER PRIMARY AIR (4 KW)
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
panel (B).
4 - Remove the screw (D).
5 - Set the burner mount (E) at a distance of
17 mm, and tighten the screw (D).
6 - Replace the control panel (B) and the knobs (A)
on completion of the operation.
ADJUSTING TOP BURNER PRIMARY AIR (7 KW)
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
1 - Pull off the knob (A).
1 - Undo the screws (C) and remove the control
panel (B).
1 - Remove the screw (D).
1 - Set the burner mount (E) at a distance of
20 mm, and tighten the screw (D).
1 - Replace the control panel (B) and the knobs (A)
on completion of the operation.
ADJUSTING TOP BURNER PRIMARY AIR (10 KW)
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
panel (B).
4 - Remove the screw (D).
5 - Set the burner mount (E) at a distance of
20 mm, and tighten the screw (D).
6 - Replace the control panel (B) and the knobs (A)
on completion of the operation.
C
A C B
C
A C B
C
A C B
- 21 -
E
D
IDM-39614602000.tif
E
D
IDM-39614602100.tif
E
D
IDM-39614602200.tif
English
IT
GB
DE
FR
ES