HANDLING AND INSTALLATION
RECOMMENDATIONS FOR HANDLING AND INSTALLATION
Important
When handling and installing the appliance
comply with the information provided by
the constructor directly on the packaging,
on the appliance and in the instructions for
PACKAGING AND UNPACKING
The packaging is designed to reduce space and as ap-
propriate to the type of transport used.
To simplify transport, some components may be re-
moved and suitably protected and packed for transport.
The packaging carries all information necessary for
loading and unloading.
When unpacking, check that all components are
present in the correct quantities and are undam-
aged.
The packaging material must be properly dis-
posed of in accordance with legal requirements.
TRANSPORT
Different means of transport may be used, depend-
ing partly on the destination.
IT
The chart shows the most commonly used alterna-
tives.
During transport, fix the packaging to the means of
GB
transport securely to prevent undesirable shifting.
DE
FR
HANDLING AND LIFTING
ES
The appliance can be handled using fork-lift or hook
equipment of suitable load-carrying capacity.
Before lifting, check the position of the load's centre
of gravity.
Important
When engaging with the lifting equipment,
watch out for the gas supply pipe.
English
use. If necessary, the person authorised to
carry out these operations must organise a
"safety plan" to protect the people directly
involved.
- 14 -
IDM-39603609700.tif
Lifting
equipment
Means of transport
IDM-3960200180.tif
IDM-39614601200.tif
7