Technical Data; Safety Devices - Angelo Po 191FAG Manuel D'utilisation Et D'installation

Main Parts
A)Hob: in stainless steel.
B)Top burners: in enamelled cast iron, the power they
are able to supply varies depending on their size.
C)Fume exhaust vent: for removal of the fumes
from the oven.
D)Ignition button: for lighting the oven burner
E)Oven control knob: regulates the gas supply to
the oven burner
F) Top burner control knobs: regulate the gas
supply to the top burners
G)Thermostatic oven: in steel, complete with air-
tight door with heat-resistant handle
H)Cupboard hatch: for accessing the inside of the
side cupboard (for version 291FAG only).
L) Gas supply connection: for connection of the gas
supply. Its position varies depending on the version
(see "Connection card" at back of manual).
See tables and "Connection chart" at the back
of the manual.
IT
IT
Although the appliance is complete with all safety
GB GB
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
DE DE
The illustration shows the position of the devices.
FR FR A)Gas supply tap: for turning the connection to the
gas supply line on and off.
B)Safety thermocouple: cuts out the gas supply if the
ES ES
flame goes out
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
English

TECHNICAL DATA

SAFETY DEVICES

B
A
F
G E
B
- 6 -
H
F L
IDM-39614600300.tif
B
A
IDM-39614600400.tif
C
B
B
D