DeLonghi DR18TG Mode D'emploi page 5

HRG5786000800 30-01-2001 09:24
POWER MODULATION FUNCTION
By turning on switches l and ll, the power regulation function is activated.
With this function, your heater will be able to select the power level most comfortable to suit your needs (see
chart below).
Turning the appliance on
Insert the plug into the electrical socket; turn the thermostat until it stops at the maximum position (6); turn on
the heater using one or a combination of switches as indicated in the table.
Regulation of the thermostat (Fig. 3-P)
When the room has reached the desired temperature, turn the thermostat slowly in an anticlockwise direc-
tion until it arrives at the position where a click can be heard and not beyond this point.
The temperature selected in this way will be automatically regulated and maintained.
Anti-frost Function
With the thermostat in the
maintained and does not fall below 41°F (5°C), whilst using minimum energy.
REMINDER
To completely shut unit off, ON/OFF switches must be placed in OFF position.
Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
Selected
Buttons
Press the I button for normal heating
at minimum power
Press the II button for normal heating
at medium power
Press both the I and II buttons for normal
heating at the maximum power available
without the instant heat system
Pagina 5
*
position and the l and /or ll switches pressed down the room temperature is
Functions Additional functions
In this mode, it is possible to activate
the Anti-Frost function. (see page 4
Anti-Frost function)
In this mode, it is possible to activate
the Anti-Frost function. (see page 4
Anti-Frost function)
In this mode, it is possible to activate
the Anti-Frost function. (see page 4
Anti-Frost function)
5