Transportation And Storage - Ryobi RLM18X33H40 Traduction Des Instructions Originales

■ Injury caused by vibration. Always use
the right tool for the job, use designated
handles and restrict working time and
exposure.
■ Exposure to noise can cause hearing injury.
Wear ear protection and limit exposure.
■ Contact with blades.
■ Injury from thrown objects.

TRANSPORTATION AND STORAGE

■ Stop the product, remove the isolator key
and the battery. Make sure that all moving
parts have come to a complete stop Allow
the product to cool down before storing or
transporting.
■ Clean all foreign material from the product.
Store it in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep
away from corrosive agents such as garden
chemicals and de-icing salts. Do not store
outdoors.
■ For transportation, remove isolator key,
secure the product against movement
or falling to prevent injury to persons or
damage to the product.
WARNING
Use extreme caution when lifting or tilting
the product for maintenance, cleaning,
storage, or transportation. The blade is
sharp. Keep all body parts away from the
blade while it is exposed.
MAINTENANCE
WARNING
Use only original
replacement parts,
attachments. Failure to do so can cause
injury, poor performance and may void your
warranty.
4 | English
manufacturer's
accessories and
WARNING
Servicing requires
knowledge and should be performed
only by a qualified service technician. For
service, we suggest you bring the product
to your nearest authorised service centre
for repair. When servicing, use only original
replacement parts.
■ Remove the isolator key and the battery
before any cleaning or maintenance task.
■ You may make adjustments and repairs
described here. For other repairs, contact
the authorised service agent.
■ Check the grass box frequently for wear or
deterioration.
■ After each use, clean the product with a
soft dry cloth. Any part that is damaged
should be properly repaired or replaced by
an authorised service centre.
■ Check all nuts, bolts and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition.
■ Be careful during adjustment of the product
to prevent entrapment of the fingers
between moving blades and fixed parts of
the product.
■ When servicing the blades, be aware that
even though the power source is switched
off, the blades can still be moved.
■ The blade on the product is sharp. Use
extreme caution and wear heavy duty
gloves when fitting, replacing, cleaning or
checking bolt security.
■ Replace damaged blades and bolts in sets
to preserve balance.
RISK REDUCTION
It has been reported that vibrations from
handheld tools may contribute to a condition
called Raynaud's Syndrome. Symptoms may
include tingling, numbness and blanching of
the fingers, usually apparent upon exposure
to cold. Hereditary factors, exposure to cold
and dampness, diet, smoking and work
practices are all thought to contribute to the
development of these symptoms. There are
measures that can be taken by the operator to
possibly reduce the effects of vibration:
■ Keep your body warm in cold weather.
When operating the product wear gloves to
extreme care and