Waring Commercial MMB145 Directives D'utilisation page 4

if a grounding-type outlet is not available, an adapter, shown
in Figure 2, may be obtained to enable a 2-slot wall outlet to
be used with a 3-prong plug.
Referring to Figure 3, the adapter must be grounded by
attaching its grounding lug under the screw of the outlet
cover plate.
CAUTION: Before using an adapter, it must be determined
that the outlet cover plate screw is properly grounded. if in
doubt, consult a licensed electrician.
Never use an adapter unless you are sure it is properly
grounded.
NoTE: Use of an adapter is not permitted in Canada.
BLENDER SPECIFICATIONS
•Capacity:48oz.WorkingCapacity
•Rating:120Volts,60Hz,13.0Amps
•BaseMaterial:Polycarbonate
•Bearing:High-PrecisionBallBearing
• C ord:6-FootThree-ConductorGroundCordwithStrain
Relief in Base
•OverallHeight:17Inches
•cETLus,NSFlisted
•OperatingCycle:1min.ON/3min.OFF
Controls:
MMB145 - Toggle switches - hi/Lo/off and Pulse
MMB150 - Electronic Keypad - hi, Lo, stop, Pulse
MMB160 - Electronic Keypad with 60-second Timer - hi, Lo,
stop, Pulse, Timer LED and Timer Up and Down Controls
MMB145 OPERATION
1. Before starting, make sure that the blender is
unplugged.
4