Convection Roast; Convection Bake - Samsung NX58H5650WS Mode D'emploi

How to set the oven for convection baking or roasting
1. Position the oven rack in the desired location.
2. Press the CONVECTION BAKE (

CONVECTION ROAST (

beep every time a pad is pressed.
The default temperature, 350°, will blink on the display.
If the default temperature is the desired cooking
temperature, skip to step 4.
3. Press the number pads for the desired cooking
temperature (for example, 4, 2, 5).
The selected cooking temperature will blink on the
display.
4. Press the START/SET pad.
The oven will automatically light and start preheating.
The display will show a blinking •, along with 150°,
Conv. Bake (
element and fan icons, until the oven reaches 150°.
Then, the display will just show the actual oven
temperature.
When the oven reaches the desired baking or roasting
temperature, it will beep 6 times.
5. Place the food in the oven and close the oven door.
Preheating is very important for good baking results. All
roasting should be done on a broil pan and grid.
6. When baking or roasting is complete, remove the
item(s) from the oven, close the oven door, and press
the OFF/CLEAR pad.
The oven will shut off, and the display will show the
time of day.
to change a programmed baking or roasting temperature, press the

CONVECTION BAKE (

the new cooking temperature, and then press the START/SET pad.
If the oven temperature is above the new setting, the oven will beep 6 times, then
show the new setting. The oven will complete cooking at the new temperature.
User manual NX58H5 Series_DG68-00526A_EN+CFR.indb 39
) or
) pad. The oven will
), and the convection bake
) or CONVECTION ROAST ( ) pad, enter
operating the oven _39
08/02/2014 12:02:20