Setting Up And Mounting; Winged Barndoor And Filter Frame Mounting / Removal - Cameo CLTS40WW Manuel D'utilisation

Sys Info
Temp = Temperature display of the LED unit
Op.Hours = Operating time display
Firmware = Displays the device software version

SETTING UP AND MOUNTING

Thanks to the integrated rubber feet, the spotlight can be placed in a suitable location on a flat surface.
Mounting on a truss is performed with the help of a suitable truss clamp (not included). Make sure that the connection to the mounting
bracket is solid, and secure the device with a suitable safety rope to the safety eyelet provided. Important Notice: Overhead installation
should only be carried out by trained personnel.

WINGED BARNDOOR AND FILTER FRAME MOUNTING / REMOVAL

To install or remove the winged barndoor and the filter frame, please press on the spring-loaded button of the
locking mechanism and fold it upwards. Place the locking mechanism in the same way in the original position.
Temp LED xxC / xxF
Temp C°/F° °C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
Hour Total Displays the total operating time in hours
Vx. xx
13