Assembling The Holder-Cable - Samsung HW-MS550 Manuel

7. Install the Soundbar with the attached
Bracket-Wall Mounts by hanging the
Bracket-Wall Mounts on the Holder-Screws
on the wall.
8. Slide the Soundbar down as shown below so
that the Bracket-Wall Mounts rest securely
on the Holder-Screws.
• Insert the Holder-Screws into the wide
(bottom) part of the Bracket-Wall
Mounts, and then slide the Bracket-Wall
Mounts down so that Bracket-Wall
Mounts rest securely on the
Holder-Screws.

Assembling the Holder-Cable

As shown in the image, use the supplied Screw to
fix the Holder-Cable to the Soundbar, and then
use the Holder-Cable to organise any cables.
ENG - 29
Holder-Cable