Installing The Holder Foot; Holder Foot Components - Samsung Harman/Kardon HW-Q60R Mode D'emploi

7. Install the Soundbar with the attached
Bracket-Wall Mounts by hanging the
Bracket-Wall Mounts on the Holder-Screws
on the wall.
8. Slide the Soundbar down as shown below so
that the Bracket-Wall Mounts rest securely
on the Holder-Screws.
• Insert the Holder-Screws into the wide
(bottom) part of the Bracket-Wall
Mounts, and then slide the Bracket-Wall
Mounts down so that the Bracket-Wall
Mounts rest securely on the
Holder-Screws.
10 INSTALLING THE
HOLDER FOOT

Holder Foot Components

Holder Foot
• The Holder Feet raise the Soundbar so you
can install the Soundbar in front of your TV
and above the legs of the TV's stand. See the
illustration below.
• You can set the Holder Feet to one of three
different heights.
• Using the Holder Feet, you can adjust the
distance between the Soundbar and your TV
to fit your TV stand's shape.
ENG - 29
x 2
Holder-Support
x 2
Screw
TV
x 2