Cleaning Sensors And Wheels; Cleaning Charging Poles; Cleaning Suction Passage And Dust Sensor - Zoef Robot SR806W SJAAN Mode D'emploi

3. Cleaning Sensors and Wheels

Slightly wipe all the sensors and wheels, as marked in figure below, with soft cleaning cloth or tool.

4. Cleaning Charging Poles

Clean the charging poles, as marked in figure below, with soft cleaning cloth or tool.

5. Cleaning Suction Passage and Dust Sensor

Take out the suction kit from robot, and then clean the suction passage and dust sensor, as marked
in figure below, with soft cleaning cloth or tool.
Note:
Please don't let the sensors get wet by water, thinner etc.
Troubleshooting
Error Code for Sensors
Cause
Error Code Solution
Suction passage blocked
AUBF Clean suction passage
13