Fagor BC-79 Manuel D'installation page 6

door. This condensation will disappear when
humidity levels
recommend installing
sufficient ventilation in a dry and/or an air
conditioned place.
NOTE: Make sure that the outlet and ON/OFF
switch are easily
appliance has been installed.
BUILT-IN INSTALLATION INSTRUCTIONS
Make sure your installation does not block the front
ventilation grille.
NOTE: When pushing the appliance into the
installation area, make sure that the mains cable
does not get trapped.
Model BC-79
Top View
drop. For prevention,
the appliance
accessible after
Model BC-112
we
with
the
Top View
If the BC-112 is installed for fitting kitchen plinth,
make sure that the ventilation gaps in the plinth are
at least 2 23⁄64" x 19 11⁄16" (60 x 500 mm) and
remove the ventilation grilles, so that warm air can
disperse unhindered. Otherwise the appliance has
to work harder, resulting in an increase in electricity
consumption.
6