Table Des Matières; Important Safety Instructions - STA-RITE ABG Série Notice D'utilisation

STA-RITE "ABG" SERIES
SWIMMING POOL PUMP
To avoid unneeded service calls, prevent possible injuries,
and get the most out of your pump, READ THIS MANUAL
CAREFULLY!
The Sta-Rite 'ABG' Series Above Ground Pool Pump:
• Is designed to circulate water in above ground swim-
ming pools (not for use in spas or inground pools).
• Is an excellent performer; durable, reliable.
Table of Contents
Safety Instructions .........................................................2
Installation .....................................................................3
Electrical........................................................................4
Operation ......................................................................5
Storage/Winterizing .......................................................5
Pump Service .............................................................6-7
Troubleshooting Guide ..................................................8
Repair Parts List ........................................................9-10
Warranty......................................................................11
IMPORTANT SAFETY
INSTRUCTIONS
Always follow basic safety precautions with
this equipment, including the following.
To reduce the risk of injury, do not
permit children to use this product unless
they are closely supervised at all times.
SAVE THESE
INSTRUCTIONS
READ AND FOLLOW
SAFETY INSTRUCTIONS!
This is the safety alert symbol. When you see this
symbol on your system or in this manual, look for
one of the following signal words and be alert to the
potential for personal injury.
warns about hazards that will cause death,
serious personal
injury, or major property damage if ignored.
warns about hazards that can cause death,
serious personal
injury, or major property damage if ignored.
warns about hazards that will or can cause
minor personal injury or property damage if ignored.
NOTICE indicates special instructions not related to hazards.
Carefully read and follow all safety instructions in this
manual and on equipment. Keep safety labels in good con-
dition; replace if missing or damaged.
Incorrectly installed or tested equipment
may fail, causing severe injury or property
damage. Read and follow instructions in own-
er's manual when installing and operating equipment. Have
a trained pool professional perform all pressure tests.
1. Do not connect system to a high pressure or city water
system.
2. Use equipment only in a pool installation.
3. Trapped air in system can cause explosion. BE SURE all air
is out of system before operating or testing equipment.
Tighten Sta-Rite trap lids to hand tight only.
Water pressure must be less than 25 PSI (7.5 kg/cm
Water Temperature must be less than 104
Fire and burn hazard. Modern motors run at
high temperatures. To reduce the risk of fire, do not allow
leaves, debris, or foreign matter to collect around the
pump motor. To avoid burns when handling the motor, let
it cool for 20 minutes before trying to work on it. An auto-
matic internal cutoff switch protects the motor from heat
damage during operation.
2
).
2
o o
F (40 C).