SPX Flow Johnson Pump AquaT Silent Electric Compact Manuel D'utilisation page 14

Silent electric marin toilet
You need
• Stainless steel bolts: 3 pcs, 8 mm (5/16") diameter of length to suit the
thickness of the mounting surface.
Dimensions & Weight
AquaT™ Silent Electric Toilets
Part. nr. Description
80-47231-01 AquaT Silent Electric Compact, 12V
TM
80-47231-02 AquaT TM Silent Electric Compact, 24V
80-47232-01 AquaT Silent Electric Comfort, 12V
TM
80-47232-02 AquaT Silent Electric Comfort, 24V
TM
C
Inlet
Ø 19 mm (3/4")
8,5 (3x)
Ø 150
Ø 171,5
Original instructions
9,2
20
10,8 kg
24
Outlet, Multi angle
Ø 38 mm (1 1/2") or
Ø 25 mm (1")
119
• Stainless steel nuts: 3 pcs preferably self-locking. If you do not use self-
locking nuts you need to add locking compound on the screws-/nuts.
• Stainless steel washers: 3 pcs.
• Drill: Diameter 9 mm.
• Silicone sealant, white.
If you do not use self-locking nuts, you will need some nutlocking
compound.
1. Put the toilet in the selected position. Using the holes in the base
as a guide, mark the positions for the 3 bolt holes on the mounting
surface. Remove the toilet and drill 3 vertical holes, with a diameter of 9
mm, through the mounting surface.
2. Apply the white silicone sealant to the outer rim of the bottom base.
3. Put the toilets on its place and tighten the fastenings securely. If you are
not using self-locking nuts, use nutlocking compound.
4. Use the sealant around the base, towards the floor.
Weight A B C
kg 130 400 340
lbs 5,1 15,7 13,4
145 400 370
lbs 5,7 15,7 14,6
A
14
AquaT
TM
D E F mm/
inch
450 205 695 mm
17,7 8,1 27,4 inch
480 250 780 mm
18,9 9,8 30,7 inch
83
E
321
D
Silent Electric marine toilet- Instruction manual
152
235