Table Des Matières - hestan GVP Série Manuel D'installation, D'utilisation Et D'entretien

TABLE OF CONTENTS
1 SAFETY PRECAUTIONS - BEFORE YOU BEGIN
4 MODEL NUMBERS
4 RATING LABEL
5 REGULATORY / CODE REQUIREMENTS
5 USING THE VENTILATION SYSTEM
6 CLEANING AND MAINTENANCE
9 TROUBLESHOOTING
10 DUCTING DO'S AND DON'TS
11 INSTALLATION
19 VENT ACCESSORIES
20 DUCT COVERS
21 PARTS / SERVICE
21 LIMITED WARRANTY
SAFETY PRECAUTIONS - BEFORE YOU BEGIN
When properly cared for, your Hestan Outdoor ventilation system will provide safe, reliable service
for many years. When using this ventilation system, basic safety practices must be followed as
described in the following pages.
IMPORTANT: Save these instructions for the local Utility Inspector's use.
INSTALLER: Please leave these Installation Instructions with the owner.
OWNER: Please read these Instructions and save them for future reference.
ELECTRICAL SHOCK HAZARD
It is the responsibility of the user to have the appliance connected
by a licensed electrician in accordance with all applicable codes and
standards, including fire-related construction. See "Step 16 - WIRING
CONNECTION" on page 17 for details.
ELECTRICAL SUPPLY AND GROUNDING
• This appliance must be grounded. See "Step 16 - WIRING CONNECTION" on page 17 for
instructions.
• This appliance must be connected to 120 VAC Single Phase, 60 Hz, with a 20 amp dedicated
circuit.
• OWNER: Have the installer show you where the electric circuit breaker is located so you know
how to shut off the power to this appliance.
Suitable for use in covered outdoor applications when installed in a GFCI protected branch circuit.
©2019 Hestan Commercial Corporation
EN
1