GlobalMIND VenenWalker PRO2 Mode D'emploi page 44

44
F) After treatment
You can leave the
ment. Be sure to remove the mains plug from the socket, however.
If you have been sweating, clean the cuffs (see the "Cleaning, care and storage"
chapter).
If you wish to place the
where it is for the next treat-
1. ... press the main switch to position I.
2. Press the
the pressure regulator to the highest
level.
3. When the cuffs are completely defl ated,
press the main switch to the central posi-
tion O to switch off the control unit.
4. Disconnect the control unit from the
mains.
5. Remove the connection tubes from the
control unit and the cuffs. Loosely roll up
the connection tubes.
6. Carefully fold the cuffs. Avoid sharp
bending, otherwise breakage points
may appear in the cuffs after frequent
use.
in the storage bag ...
extraction switch and turn