GlobalMIND VenenWalker PRO2 Mode D'emploi page 42

42
1a. Switching on WITHOUT timer:
Press the main switch to position I – the
green operating lamp goes on.
1b. Switching on WITH timer:
Press the main switch to position II – the
blue timer lamp goes on.
Use the rotary knob of the timer to set
the required period (between 0 and
60 minutes).
2. Turn the pressure regulator clockwise
to the highest level so that the pump-
ing process does not last longer than
10 minutes.
3. Press the
cuffs. The control unit begins to fi ll the
cuffs alternately with air. The legs are
then massaged by the infl ating and de-
fl ating air cushions.
Please note that the cuffs are not
activated simultaneously but con-
secutively. The pressure is built up
in one cuff fi rst and then in the other.
button to pump up the