GlobalMIND VenenWalker PRO2 Mode D'emploi page 43

It is natural for your legs to sweat in the cuffs. This is not a cause for
concern: in fact it is an intended effect which stimulates metabolism in
the legs.
E) Finishing the treatment
4. Stretch your legs and take up a comfort-
able position.
In order to ensure the blood can circulate
unhindered, it is essential to ensure that
the leg in the cuff is stretched out during
treatment!
5. If the pressure exerted on your legs is
too powerful or unpleasant, simply turn
down the pressure regulator until the
pressure is reduced. The ideal pressure
on your legs should be powerful but not
unpleasant.
1. Switch the control unit off after 20 to
30 minutes. For this purpose, press the
main switch to the central position O.
If the timer has been activated, the con-
trol unit switches off automatically after
the set period. After this, press the main
switch to the central position O.
2. Wait until the cuffs have loosened. You
can then open the zips and remove your
legs from the cuffs.
OR: Press the main switch to posi-
tion I after treatment and press the
extraction switch. This starts air
extraction from the cuffs. For de-
tails, read the following section "Af-
ter treatment".
43