Winix ZERO Pro Manuel D'utilisation page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
INSTALLING THE FILTERS
Install the filters until they fit securely in
place.
Filters must be installed in this order:
3
4
True HEPA filter with Cleancel™ (rear)
,
2
AOC™ Carbon Filter (middle)
1
Pre-filter (front)
ˍ To install the pre-filter, insert bottom tabs
into the slots on either side of the lower part
of the unit, then rotate upward to insert the
upper tabs into the slots at the top part of
the unit until both sides audibly click into
place.
Replace the front panel by first inserting
the latch at the bottom edge into the
base of the unit, then rotate the panel
upward toward the top of the unit until it
magnetically snaps closed.
When to service and replace filters:
Filter
1
Pre-filter
2
AOC™ Carbon Filter
3
,
4
True HEPA filter
with Cleancel™
※ Intervals between filter replacement may vary depending on environment.
※ For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of
other filters.
English
Indicator Light
none
FILTER
T
This unit
is compatible
with
filter
ITEM: 1712-0093-01
When to
service
Clean once every
14 days
Clean once every
3 months
Can NOT be
WASHED
4
True HEPA
lter with
3
Cleancel™
AOC
TM
2
Carbon
Filter
Pre- lter
1
When to
replace
Permanent
Lasts up to
6~12 months
ZERO Pro
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Azpu370-iwe

Table des Matières