Winix ZERO Pro Manuel D'utilisation page 14

FILTER CARE
2. Removing Filters
Ensure the unit is turned off and unplugged before removing filters.
※ The unit will automatically power off when front panel is opened.
Remove the front panel by grasping its
①
upper edge and gently pulling towards
yourself.
ˍ To remove the front panel, the latch at
the lower edge of the panel must be
released from its position.
Press the tabs on the top edge to remove
②
1
the Pre-filter.
First remove the
③
and then the
Cleancel™ by pulling on the numbered tags
at the top of each filter.
NOTICE
English
2
AOC™ Carbon Filter
3 , 4 True HEPA filter with
ˍ For optimal performance, only genuine Winix filters should
be used with this unit.
Latch
Tabs
ZERO Pro
14