Manual Mode, Timer And Plasmawave - Winix ZERO Pro Manuel D'utilisation

MANUAL MODE, TIMER AND PLASMAWAVE

Every time the Mode button is pressed, the Mode LED light will cycle through the
settings. (Auto, Sleep, Low, Medium, High, Turbo)
3. Manual Mode (setting fan speed)
Users can opt to manually set the fan speed to Low, Medium, High or Turbo.
Press the Mode button to select the desired
①
fan speed.
ˍ The mode LED light will indicate the
selected fan speed, and operation will
begin.
Note
4. Timer
The timer can be set for when you want the unit to run for a specified period of time.
Select the desired period by pressing the
①
Timer button.
ˍ The Timer LED light will indicate the
selected length of operation.
ˍ Every time the Timer button is pressed
the Timer LED light will cycle through
the settings.
(1hr, 4hr, 8hr, [NO TIMER]).
Note
5. PlasmaWave
By default, PlasmaWave
Press the PLASMAWAVE button when the
①
power is on to enable or disable this feature.
English
ˍ When Manual Mode is in use, Auto and Sleep modes are
automatically disabled.
ˍ The WINIX SMART app will display how much time is
remaining on the timer.
®
®
is enabled whenever the unit is powered on.
®
ZERO Pro
11