For The Installer - LVI TOUCH E3 Manuel D'installation Et D'utilisation

FOR THE INSTALLER

INSTALLATION OF THE TOUCH SCREEN
01. Main characteristics
• Touch screen (4 inches)
• Interface via internet. WiFi 2.4 GHz (not 5.0 GHz)
• Wall mountable with power supply 85-265V (50-60)Hz
• Can be placed on the table with supplied bracket, and mini USB power supply (5V).
• Battery operation (only for settings)
• RF Communication with other devices
• Multiple heating device control.
• SD Card update
• Intuitive menus for device management
Charge the Touch E3 for at least one hour before pairing the devices
!
already mounted.
02. Available devices for connecting to Touch E3 (For example: Yali Digital,
Parada and Ramo)
• Up to 50 rooms (zones) with one master radiator in each room.
• Up to 50 slave radiators to be distributed among the masters.
Examples: a) 50 zones with 1 master and 1 slave in each, total 100 radiators
b) 1 zone with 1 master and 50 slaves, total 51 radiators.
It is recommended to limit the number of slaves to 10 in one zone.
FOR
UK
THE INSTALLER
3 |
P16MI417 - A02 - 01/16