Radio Pairing (See "Pairing Radiators" Section, P 7) - LVI TOUCH E3 Manuel D'installation Et D'utilisation

FOR THE INSTALLER AND FOR
ADVANCED USERS
OTHER FUNCTIONS FOR THE INSTALLER
01. Press "Main menu" button
02. Press the "Parameter setting" button
03. Create house (See "Create house" section, p 7)

04. Radio pairing (See "pairing radiators" section, p 7)

05. To delete a device
• Press "Delete a device"button
• Press "heating"button
• Use the arrows to scroll through the list of paired devices.
• Select the device to be deleted
- Note: To make sure that the right device is deleted, identify it first (See below)
- Note: If the first device in a room is deleted, all devices in that room
will be deleted.
• Press "Green check"button to confirm
06. To delete all devices
• Press "Delete all devices"button
• Press "Green check"button to confirm
• Press "Red cross"to decline
07. Identify a device and edit some device information; such as name, power,
surface temperature limitations and sequential mode.
• Press "Identify a device"button
• Press the "Radio button"
• Make the device send a radio message
- (On Yali, press OK and wait for the backlight to go off)
• Make a note of the ID-number that is displayed on 3rd line of the screen >>
• To be sure it is right, send a second radio message from the device and compare
the ID-number (it could happen that another device coincidently sends
a message at the same time, therefor it is good to repeat this operation).
A
I
(long press)
FOR THE INSTALLER AND FOR
ADVANCED USERS
P16MI417 - A02 - 01/16
UK
19 |