Receiver - Radiant CLOUDWARM Manuel D'installation Et D'utilisation

2.1.6. RECEIVER

The Receiver enables data exchange between the
boiler and the Transmitter unit.
The User Interface of the Receiver features a key
(4-fig.1) and 3 LEDs (1,2,3-fig.1) that communicate
various signals based on the colour of the LED and
the flashing frequency.
fig. 1
IF THE BOILER IS CONNECTED TO THE RECEIVER
IN ROOM THERMOSTAT MODE (ON/OFF), THE
LEDS COMMUNICATE THE FOLLOWING SIGNALS:
LED COLOUR
RED (1-FIG.1)
GREEN (2-FIG.1)
18
CLOUDWARM WIRED - RAD - ING - Manual - 1606.1
2. USE
1 2 3
4
TYPE OF
FLASHING SIGNAL
FIXED POWER SUPPLY
CONNECTED
OFF POWER SUPPLY
DISCONNECTED
FIXED BOILER ON
OFF BOILER OFF
TYPE OF
LED COLOUR FLASHING
AMBER (3-FIG.1) OFF
FLASHING
IF THE BOILER IS CONNECTED TO THE RECEIVER
IN OPEN THERM MODE (ON/OFF), THE LEDS
COMMUNICATE THE FOLLOWING SIGNALS:
TYPE OF
LED COLOUR FLASHING
RED (1-FIG.1) FIXED
OFF
GREEN (2-FIG.1) FIXED
OFF
SIGNAL
NORMAL OPERATION
COMMUNICATION
WITH TRANSMITTER
LOST (PRESS KEY
'4' - FIG.1 TO SWITCH
THE BOILER ON OR
OFF).
SIGNAL
POWER SUPPLY
CONNECTED
POWER SUPPLY
DISCONNECTED
BOILER ON
BOILER OFF