Radiant CLOUDWARM Manuel D'installation Et D'utilisation page 75

4. Enter the name of the device, indicating the
name of the room in which the transmitter is
installed (see fig.3).
5. Enter the ID code of the device, located at
the back of the transmitter or on the box and
confirm by clicking on "Save" (see fig.3).
CONTROL PANEL
When the receiver is connected to the boiler in
Open Therm you can view, through the App, a
control panel to manage both the room heating and
the state of the boiler (see fig.4).
fig. 3
CLOUDWARM WIRED - RAD - ING - Manual - 1606.1
2. USE
fig. 4
15