Using Your Appliance; Using The Programmer; How To Set The Time - THOMSON BOT63PXD Mode D'emploi

99644891_A_EN.qxp 20/12/2007
EN

2 / USING YOUR APPLIANCE

• •

USING THE PROGRAMMER

• How to set the time

- - When plugged in
The display flashes 12:00 (fig.1).
Set the time by pressing the + or - buttons
(holding your finger on the button allows you
to scroll through the numbers rapidly) (fig.2).
Example: 12:30
Press the " " button to confirm.
The display stops flashing.
- To set the time on the clock
The function selector switch must be in the 0
position (fig.1).
Press and hold the "
seconds until the display starts flashing (fig.2),
then release. Audible beeps indicate that it is
now possible to set the time.
Adjust the clock setting with the + and -
buttons (fig.3).
Press the " " button to confirm (fig.4).
Warning
If there is no confirmation from the
" " button, the time is recorded
automatically after a few seconds.
17:11 Page 6
" button for a few
6
fig.1
fig.2
fig.1
fig.2
fig.3
fig.4