Use Of Other Displays - Batavus ION PMU4 Mode D'emploi

3.9

Use of other displays

The display acts as an immobilizer and, therefore, you cannot install
of fully use every display on your E-bike.
A unique code has been saved on your
display that matches the related E-bike.
If you want to switch on the assistance or
lights, the system will check whether the
display and the bike form a unit. If this is
not the case, error message E14 will be
displayed and the assistance and lights
cannot be switched on. If you have two
E-bikes with the same display type, you can
register both displays on both bikes. Your
certified E-bike dealer can perform this for you.
Both displays will then work on both bikes.
59
E14
59
FAILURE
Unknown display