General Settings - Hama Dashcam 30 Mode D'emploi

9.2.1 Resolution
Select the desired resolution (VGA - 12 megapixels) of the recorded photo material.
• Navigate to the Resolution menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.2.2 Image display
When the picture display is activated, the picture taken is shown on the display for a short time (2/5
seconds). A new picture can only be taken after this time has elapsed.
Select Off to deactivate this function.
• Navigate to the Image display menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.2.3 Watermark
With the mode activated, a time and date stamp is added to every photo file.
• Navigate to the Watermark menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.2.4 Contrast
Improve the quality of the photo through contrast adjustment (-2 to +2).
• Navigate to the Contrast menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).

9.3 General settings

• Press [MENU] (8) twice to go to the camera's settings menu.
• Alternatively, press [MENU] (8) once if you are already in the Video/Photo menu.
• is shown at the upper-left edge of the screen.
• Use the navigation buttons [◄] (9) / [►] (5) to navigate through the menu.
• Confirm your selection by pressing [OK] (7).
11