General Settings; Screen Saver - Hama 60 Mode D'emploi

• Navigate to the Watermark menu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).

9.3 General settings

• Press and hold [MODE] (8) for about 3 seconds to access the Settings menu of the camera.
• Alternatively, briefly press [MODE] (8) while in the Video/Photo menu.
• is shown at the upper-left edge of the screen.
• Use the navigation buttons [▼] (9) / [▲] (10) to navigate through the menu.
• Confirm your selection by pressing [OK] (11).
9.3.1 Date/time
• Navigate to the Date/time menu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to set the year and confirm your entry by pressing
[OK] 11).
• Afterwards, adjust the following information in succession following the same procedure: month,
day.
• Confirm your selection by pressing [MODE] (8).
9.3.2 Off following inactivity
Select the time interval (1 minute /3 minutes) after which the camera automatically switches off if
not in use.
Select Off to deactivate this function.
• Navigate to the Off following inactivity menu item and confirm your selection by pressing
[OK] (11). A new overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).

9.3.3 Screen saver

Select the time interval (3 minutes / 5 minutes / 10 minutes) after which the screen saver is
activated. If you do not press a button during this time interval, the display switches off. Video
recording continues, however.
Select Off to deactivate this function.
• Navigate to the Screen saver menu item and confirm your selection by pressing [OK] (11). A new
overview window opens.
• Use the navigation buttons [▼] (9) / [▲] (10) to select the desired setting.
• Confirm your selection by pressing [OK] (11).
12