Format Memory Card; Screen Saver; Factory Settings - Hama Dashcam 30 Mode D'emploi

9.3.1 Format memory card

Delete all files located on the inserted memory card.
• Navigate to the Format memory card menu item and confirm your selection by pressing [OK] (7).
A new overview window opens.
• Confirm the formatting with OK, or select Cancel to cancel the operation.
9.3.2 Language
Select the language for the menu navigation.
• Navigate to the Language menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.3.3 Off following inactivity
Select the time interval (1 minute /3 minutes) after which the camera automatically switches off if
not in use.
Select Off to deactivate this function.
• Navigate to the Off following inactivity menu item and confirm your selection by pressing
[OK] (7). A new overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).

9.3.4 Screen saver

Select the time interval (1 minute / 3 minutes / 5 minutes) after which the screen saver is activated.
If you do not press a button during this time interval, the display switches off. Video recording
continues, however.
Select Off to deactivate this function.
• Navigate to the Screen saver menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).

9.3.5 Factory settings

• Navigate to the Factory settings menu item and confirm your selection by pressing [OK] (7). A
new overview window opens.
• Confirm the reset with OK, or select Cancel to cancel the operation.
12