Adding A Step To A Chase; Delete A Chase - Chauvet DJ Obey 10 Manuel De L'utilisateur

3) All LED's will flash, indicating that the
Chase was successfully erased.

Adding a Step to a Chase

Action ·
1) Press and hold the PROGRAM button
for 3 seconds to enter programming
mode.
2) Press the desired CHASE (1~6) button.
3) Use the Step Up/Step Down buttons to
scroll through the chase and arrive at
the step number for which you would like
to add a step to.
4) Select a FIXTURE button.
5) Adjust the Faders to the desired look on
stage.
6) Press Music/Add button and one step
number will be added after the
previously displayed step number. All
FIXTURES LED indicators will flash to
confirm successful copy.
7) Repeat steps 3~6 until all scenes have
been added to the chase.
8) Press and hold the PROGRAM button
for 3 seconds to exit programming
mode.

Delete a Chase

Action ·
1) Press and hold the PROGRAM button
for 3 seconds to enter programming
mode.
2) Press the CHASE button (1~6) to be
deleted.
3) Press and hold the AUTO/DEL button
and the respective CHASE button then
release to delete the chase. All LED's
will blink 3 times. All FIXTURES LED
indicators will flash to confirm successful
copy.
Obey 10 User Manual
¥
Notes
The step will be added after the scene displayed
on the digital readout.
¥
Notes
Steps will remain programmed on the controller.
Only the chase is affected.
11 Rev. 8