Common Terms - Chauvet DJ Obey 10 Manuel De L'utilisateur

Common Terms

The following are common terms used in intelligent light programming.
§
Blackout is a state where all lighting fixtures' light output are set to 0 or off, usually on a
temporary basis.
§
DMX-512 is an industry standard digital communication protocol used in entertainment lighting
equipment. For more information read Sections "DMX Primer" and "DMX Control Mode" in the
Appendix.
§
Fixture refers to your lighting instrument or other device such as a fogger or dimmer which you
can control.
§
Programs are a bunch of scenes stacked one after another. It can be programmed as either a
single scene or multiple scenes in sequence.
§
Scenes are static lighting states.
§
Sliders are also known as faders.
§
Chases can also be called programs. A chase consists of a bunch of scenes stacked one after
another.
§
Scanner refers to a lighting instrument with a pan and tilt mirror; however DMX controllers can
use this term to control any DMX-512 compatible device as a generic fixture.
§
MIDI is a standard for representing musical information in a digital format. A MIDI input would
provide external triggering of scenes using midi device such as a midi keyboard.
§
Standalone refers to a fixture's ability to function independently of an external controller and
usually in sync to music, due to a built in microphone.
§
Fade slider is used to adjust the time between scenes within a chase.
§
Speed slider affects the amount of time a scene will hold its state. It is also considered a wait
time.
§
Shutter is a mechanical device in the lighting fixture that allows you to block the light's path. It is
often used to lessen the intensity of the light output and to strobe.
§
Patching refers to the process of assigning faders to a DMX channel within a fixture.
§
Playbacks can be either scenes or chases that are directly called to execution by the user. A
playback can also be considered program memory that can be recalled during a show.
Obey 10 User Manual 8 Rev. 8