Handling Informations; Packing Lifting And Transport; Checks Upon Delivery; Unpacking - CTM MIZAR Mode D'emploi

4.1 PACKING LIFTING AND TRANSPORT

During all lifting or transport operations, make sure
that the packed machine is securely anchored to
prevent it from tipping over or falling accidentally.
Transport vehicle loading and unloading operations
must be carried out with adequate lighting.
The packed machine must be handled using ade-
quate devices, making sure not to damage/strike
any part of the packing, not to tip it over and to be
very careful when placing it on the ground.
☞
( ) All these instructions also apply to the batter-
ies and the battery charger.

4.2 CHECKS UPON DELIVERY

☞
( ) When the goods are delivered (machine, bat-
tery or battery charger) by the transporter, carefully
check the condition of the packing and its contents.
If the contents have been damaged, notify the
transporter and reserve the right, in writing (select
the word "reserve" on the document), to submit a
claim for compensation before accepting the goods.

4.3 UNPACKING

!
( ) Wear safety clothing and use adequate tools
to limit the risks of accidents.
The machine is packed with in a cardboard housing
placed on a wooden crate; to unpack the machine
carry out the following steps:
- Use scissors or clippers to cut and eliminate the
plastic straps.
- Slip off the cardboard housing from the top of the
packed machine.
- Remove the envelops inside and check their con-
tents (use and maintenance manual, battery
charger connector)
- Remove the metallic brackets or plastic straps that
secure the machine to the pallet.
- Release the brushes and the squeegee from the
packing.
- Take the machine off the pallet (pushing it back-
ward) by using an inclined surface that is solidly at-
tached to the floor and to the pallet.
Keep all the pieces of the packing since they might
be useful in the future to protect the machine and
the accessories during transport to another location
or to authorized service centers. If not, the packing
can be disposed in accordance with current disposal
laws.

4 - HANDLING INFORMATIONS

28
4.4 DIMENTIONS AND WEIGHT OF THE
PACKING
Volume:
Weight: machine without batteries
Model 500 mm cleaning width
mains power AC 230V
Model 500 mm cleaning width
DC 24V power supply - without traction
Model 500 mm cleaning width
DC 24V power supply - with traction
Model 550 mm cleaning width
DC 24V power supply - without traction
Model 550 mm cleaning width
DC 24V power supply - with traction
Model 660 mm cleaning width
DC 24V power supply - with traction
Model 660 mm cleaning width
DC 24V power supply
with traction and actuator
1,26 m³
145 kg
129 kg
139 kg
135 kg
145 kg
158 kg
160 kg