Scrapping Of The Machine; Noise And Vibrations - CTM FLICK Mode D'emploi

them in accordance with current legal provisions.
!
( ) If the machine malfunctions and/or operates
inefficiently, turn it off immediately (disconnecting
it from the electric power supply or from the bat-
teries) and do not tamper with it.
Contact one of the manufacturer's technical serv-
ice centres.

( ) All maintenance or accessory replacement op-
erations must be carried out in environments with
adequate lighting and only after having discon-
nected the machine from the electric power supply
by detaching the battery connector.
☞
( ) All work on the electrical system and all main-
tenance and repair operations (especially those not
explicitly described in this manual) should be car-
ried out only by authorized service centers or by
specialized technical personnel who are experts in
the sector and in the pertinent safety regulations.
☞
( ) The machine owner can only use origi-
nal accessories and spare parts supplied ex-
clusively by the manufacturer since such
parts are the only ones that guarantee that
the equipment will operate safely without
any problems. Do not use parts disassembled
from other machines or other kits as spare
parts.
☞
( ) Before each use, check the machine and, in
particular, check that the battery charging cable and
the connector are in good condition and safe for
use. If they are not in perfect condition, do not use
the machine for any reason until an authorized spe-
cialist repairs the defective parts.
☞
( ) If foam or liquid is noted, immediately turn off
the suction motor.
☞
( ) Do not use the machine on textile flooring,
such as rugs, carpeting, etc.
Wax, foaming detergents or dispersions along the
hoses may cause serious problems for the machine
or clog the hoses.

3.2 SCRAPPING OF THE MACHINE

If the machine will no longer be used, remove the
batteries and dispose of them in accordance with
the eco-compatibility regulations as set forth in Eu-
ropean standard 91/157/EEC or deposit them in an
authorized collection centre.
To dispose of the machine, comply with the current
laws where it is used:
- disconnect the machine from the mains and clean
it after emptying any liquids;
- separate the machine into groups of homoge-
neous materials (plastics in accordance with the re-
cycling symbol, metals, rubber, packing). For parts
containing different materials, contact the compe-
tent authorities;
3 - SAFETY INFORMATIONS
Each homogeneous group must be disposed of in
accordance with recycling laws.
In addition, it is recommended to eliminate those
parts of the machine that may be dangerous, es-
pecially for children.
of the EU-Member States transforming this Direc-
tive) to dispose of this product or its electrical/elec-
tronic accessories as unsorted domestic waste. You
shall use the designated gratis possibilities for re-
turn instead.

3.3 NOISE AND VIBRATIONS

- Acoustic pressure: LpL = 73 dB
- Acoustic power measured: LwA = 82 dBA
- Acoustic power granted: LwA = 83 dBA
- Vibrations: 0,29 m/s² (Uncertainty ±15%)
29
As owner of an electrical or electronic
product, you are not allowed by law
(according to
2002/96/EC of 27 January 2003 on
waste electrical and electronic equip-
ment and the particular national laws
EU-Directive