Setting The Washing Program And Switching On And Off - Fulgor Milano F6DW24 SS1 Mode D'emploi

EN
On/off button
1
Press to power the appliance.
Program indicator lights
2 These show which program is selected and whether there are any faults
(Troubleshooting).
Program indicator lights
3 These show which program is selected and whether there are any faults
(Troubleshooting).
Add salt indicator light
4
Shows the appliance is low on salt.
Add rinse aid indicator light
5 (only fitted on some models)
Shows the appliance has run out of rinse aid.
Quick time option button
6
Press this button to start one of the quick time programs (see pag. 8).
Quick time programs indicator light
7
Shows that one of the quick time programs will be run
Extra drying option button
8
Press to select the extra drying option
Extra drying option indicator light
9
Shows the function is active
Sanitation indicator light
10
Shows that sanitation has been completed (see notes in the programs table)
Programme delay button
11
Press to delay the start of the program up to 9 hours.
12 Information display
2.2
The dishwasher is equipped with a control panel which is used to program the ap-
pliance and switch it on and off.
The manual contains the programs table for several models.
6
USER INSTRUCTIONS
Setting the washing program and switching on
and off
2 3 4 5
end
1/2
10 9 8 7 6
Sanitized
160°F
12 11 1