Fulgor Milano F6DW24 SS1 Mode D'emploi page 46

EN
WARNINGS
AQUASTOP MODELS; THE AQUASTOP DEVICE PREVENTS FLOOD-
ING IN THE EVENT OF A WATER LEAK. WHEN THE AQUASTOP DEVICE
IS TRIPPED (THE ERROR IS INDICATED ON THE DISPLAY), CALL IN A
QUALIFIED TECHNICIAN TO IDENTIFY AND REPAIR THE FAULT. IN
MODELS EQUIPPED WITH THE AQUASTOP DEVICE, THERE IS A SO-
LENOID VALVE INSIDE THE WATER INTAKE HOSE. DO NOT CUT THE
HOSE AND DO NOT ALLOW THE SOLENOID VALVE TO DROP
INTO WATER. IN THE EVENT OF DAMAGE TO THE WATER INTAKE
HOSE, DISCONNECT THE APPLIANCE FROM THE ELECTRICAL POWER
SUPPLY AND FROM THE WATER SUPPLY.
IMMEDIATELY AFTER INSTALLING THE DISHWASHER, PERFORM A
QUICK TEST OF THE APPLIANCE (SEE "INSTALLATION" MANUAL).
IF THE DISHWASHER FAILS TO OPERATE CORRECTLY, DISCONNECT
IT FROM THE ELECTRICAL POWER SUPPLY AND CALL THE NEAREST
TECHNICAL SERVICE CENTRE. DO NOT ATTEMPT TO REPAIR
THE APPLIANCE .
THE DISHWASHER MEETS ALL THE REQUIREMENTS SET OUT BY THE
REGULATIONS IN FORCE CONCERNING SAFETY AND ELECTRICAL
EQUIPMENT. ANY TECHNICAL CHECKS SHOULD BE CONDUCTED EX-
CLUSIVELY BY A TRAINED AND AUTHORIZED TECHNICIAN:
REPAIRS CARRIED OUT BY UNAUTHORIZED PERSONS WILL
THE WARRANTY, AS WELL AS POSING A POTENTIAL
HAZARD TO THE USER.
BEFORE CLEANING OR SERVICING THE APPLIANCE, REMOVE
THE PLUG OR TURN OFF THE SWITCH.
44