Additional Functions; Adjusting The Water Softener - Fulgor Milano F6DW24 SS1 Mode D'emploi

2.3

Additional functions

2.3.1

Adjusting the water softener

N.B.: a different washing program from soak must be used to
make the following adjustment
Press and hold down the program delay button (11) until the preset value appears
followed by a dot (normally 3.). Release the button and then press it again until the
required value is displayed, as indicated in the table (see tab. 2-03).
The 6 possible adjustment levels will appear in this sequence:
3., 4., 5., 0., 1., 2..
When the required value appears on the display, release the button; after 5 seconds
the appliance automatically reverts to the program delay and the adjustment is set
to the chosen value.
USER INSTRUCTIONS
EN
13