Schedule Overrides - Mitsubishi Electric RedLINK MHK2 Manuel D'utilisation

Schedule Overrides

A Schedule Override occurs when the Remote Controller is running a local schedule and
the set point is adjusted.
Hold Until (Temporary Hold): Overrides the current temperature set point for a maximum
of 24 hours. You might use this feature to hold a temperature until a specific time.
Permanent Hold: Overrides the current temperature set point permanently until you
manually change it or reactivate a schedule.
Holiday Hold: With a running schedule, you can hold the current system settings for a set
time period, adjustable in one day increments.
Program Schedule Override (Temporary)
1 Touch or
your desired temperature. Hold Until will appear
together with the time the hold will end.
To change when the hold will end, touch Hold
2
Until and wait until the time starts blinking. Then,
touch or to set when you want the hold to
end. Touch Hold Until once more to confirm
changes and return to the home screen.
After the hold period ends, the controller will
automatically return to the program schedule. If you
want to cancel the hold, touch Hold Until and then
touch Run Schedule.
Program Schedule Override (Permanent)
1 Touch or
reach your desired temperature. Hold Until will
appear together with the time you want the hold to
end.
2 Touch Hold Until. Permanent Hold will appear
on screen. Touch Permanent Hold to hold this
temperature until you manually change it.
To end Permanent Hold and return to the program
schedule, touch Permanent Hold and then touch Run
Schedule.
33-00447EFS_B.indd 5
on the controller home screen to set
on the controller home screen to
5
Heat
Auto
Vane
Heat
Auto
Vane
10/17/2019 3:22:51 PM