jakob HBL Manuel D'utilisation Et De Montage page 16

Inspections Supplement HBL / HBLE / HBS
Inspection table:
The inspection was carried out according to Point 6 of the Instructions for Use (HBL / HBLE / HBS):
Continued use of the suspension point is only permissible if it passes (yes) inspection!
If it does not pass inspection according to Point 6 (Point 3 HBS), then appropriate contingency measures must be
found – like mounting load plates with screw anchors at the appropriate locations or installing a beam.
Table
Date / date stamp (product casing):
Purchase date:
Product Date
(HBL, HBLE, HBS)
Critical incidents (e.g. overloading)
8
Inspection according Identified defects
to Point 6 successful
(yes / no)
Status: 2021.05.04, Jakob AG, CH -3555 Trubschachen, technical specifications subject to change at any time. Errors and omissions may occur.
Date of first use:
Order number:
Signature