Dual Control Pixels - Chauvet Professional MAVERICK MK2 WASH Manuel D'utilisation

Dual control pixels

The Pixels protocol controls the individual output of the LEDs. Choose from DMX, Art-Net™, sACN, or
Kling-Net. In this mode, the three personalities available are: Basic (36 channels), Standard
(48 channels), and Advanced (96 channels).
Dual control pixels protocol
To select the Dual Control Pixels protocol, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings, or touch the display
where it says Control Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Dual Control, or touch the display where it says Dual Control.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP> or <DOWN> to select Pixels, or touch the display where it says Pixels.
7. If using the buttons instead of the touchscreen, press <ENTER>.
8. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from DMX, ArtNet, sACN, or Kling-Net, or
touch the display where it says the desired protocol option.
9. If using the buttons instead of the touchscreen, press <ENTER>.
Dual control pixels personality
To select the Dual Control Pixels personality, set the Protocol, then do the following:
1. Use <UP> or <DOWN> to select Personality, or touch the display where it says Personality.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (36-channel), Standard
(48-channel), or Advanced (96-channel), or touch the display where it says the desired
personality.
4. If using the buttons instead of the touchscreen, press <ENTER>.
ArKaos Kling-Net can only be assigned the Basic and Standard Pixels personalities.
Dual control pixels start address
To set the starting address of the Dual Control Pixels mode, set the Protocol, then follow the instructions
below:
1. Use <UP> or <DOWN> to select Start Address, or touch the display where it says Start Address.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Enter the starting address (1–512) with one of the following methods:
• Type the address number using the number pad that shows on the touchscreen display.
• Using the buttons (or the button icons on the sides of the display):
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
4. Press <ENTER>.
Dual control pixels universe
To set the Universe address of the Dual Control Pixels mode when using Art-Net™ or sACN, set the
Protocol to ArtNet or sACN, then do the following:
1. Use <UP> or <DOWN> to select Universe, or touch the display where it says Universe.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Enter the universe address (0–254 for Art-Net™, 0–255 for sACN) with one of the following
methods:
• Type the address number using the number pad that shows on the touchscreen display.
• Using the buttons (or the button icons on the sides of the display):
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
4. Press <ENTER>.
Page 17 of 267
Home Screen shows on the display. Press <ENTER>.
Maverick MK2 Wash User Manual Rev. 11
Operation