Jata calor RD221 Instructions D'usage page 11

• Do not place near the curtains, flammable items or
products.
• Always place the heater in vertical position.
• Do not rest the cable on hot parts of the appliance.
• The cleaning and maintenance done by users, can not
be done by children without any supervision.
• If the cable were to deteriorate it must be changed by
an Authorised Service Centre.
LEGS ASSEMBLING
• The legs (5) must be assembled at the end of the lower part of the appliance.
• Make coincide the slots of the legs, with the hooks placed at the bottom of lower side and slide
the leg outwards to leave it correctly fixed. Next screw them.
INSTRUCTIONS OF USE
• Unwind totally the cord from the cord storage.
• Plug in the appliance to the mains.
• Turn the thermostat knob (3) clockwise to the maximum position. (MAX.)
• Place the power selector (2) in the desired position. Doing this operation the indicator (4) will
light on. Have in mind that:
Position I: minimum power.
Position II: maximum power.
Position 0: off.
• Once the room reached the desired temperature, turn the thermostat knob (3) anti-clockwise until
the pilot light (4) goes off. Leave the knob in that position and the thermostat automatically
maintains at the selected temperature.
"NO-FROST" FUNCTION
• Being the thermostat knob (3) in anti frost position
radiator switches on automatically when the temperature of environment falls bellow 5° C.
MAINTENANCE AND CLEANING
• Before you clean the appliance, ensure the appliance is unplugged.
• Allow the hot parts to cool.
• It is important to keep the air intake and output grids clean of dust and fluff.
• Clean with a soft dry cloth.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the
surfaces of the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the environment protection.
and the power selector (2) activated, the
11