Safety Warnings For Drills; Operating Controls - Wurth Master BM 13-XE Traduction De La Notice Originale

BM_SB 13-XE.book Seite 10 Montag, 12. April 2010 3:27 15
GB
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Wear ear protectors with impact drills. Expos-
ure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
Hold the power tool only by the insulated
gripping surfaces when performing an opera-
tion where the cutting tool may contact hidden
wiring. Contact with a "live" wire will also
make exposed metal parts of the power tool
"live" and shock the operator.
When working with the machine, always hold
it firmly with both hands and provide for a
secure stance. The power tool is guided more
secure with both hands.
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over
the power tool.
Hold the machine with a firm grip. High reac-
tion torque can briefly occur while driving in
and loosening screws.
Do not use a machine with a damaged mains
cable. Do not touch the damaged cable and
pull the mains plug when the cable is dama-
ged while working. Damaged cables increase
the risk of an electric shock.
1 Keyless drill chuck
2 Spindle collar
3 Selector switch "Drilling/impact drilling"
(SB 13-XE)
4 Rotational direction switch
5 Soft grip handle
6 Lock-on button
7 Mains cable module
8 On/Off switch
9 Depth stop rod
10

Safety warnings for drills

Connect machines that are used in the open
via a residual current device (RCD).
Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes pro-
perty damage or may cause an electric shock.
Use only original Würth parts and accesso-
ries.
are strictly followed. In addition, the general
safety instructions in the enclosed booklet must
be followed. Before using for the first time, ask
for a practical demonstration.
For further notes on safety refer to enclosed Sheet

Operating Controls

10 Gear selector switch
11 Button for depth-stop adjustment
12 Auxiliary handle
13 Thumbwheel for speed pre-selection (BM 13-XE)
14 Securing screw
15 Allen key
16 Open-end spanner
Not all of the accessories illustrated or described are included
as standard delivery.
Working safely with this machine is
possible only when the operating and
safety information are read completely
and the instructions contained therein
The machine must not be damp and
must also not be operated in damp sur-
roundings.
Before each use of the machine, check
the machine, cable and plug. Have
repairs carried out only through the
Würth Master-Service or by a qualified
technician. Insert the plug into the
socket only when the machine is swit-
ched off.