Easypix DVC 5016 HD Mode D'emploi page 20

When connecting the camcorder to the computer or TV:
Problem
I cannot view the video clips
on my computer.
Driver installation failed.
The TV screen does not
display after connecting the
camcorder to the TV.
A confl ict with other installed
camcorder or capture device
occurred.
Noises occur on my computer
screen when using Video
Conferencing.
The contents in this manual are subject to change without prior notifi cation.
Cause
Driver or software is not
installed on the computer.
The installation is terminated
abnormally.
The camcorder has been
connected to the PC via the
USB cable before installing
the driver.
The camcorder is not cor-
rectly connected to the TV.
The device is not compatible
with the camcorder.
The fl icker setting does not
match the standard of the
country you are staying.
18
Solution
Install Direct X 9.0c or above
and Windows Media 9.0
Codecs to solve this problem.
Install the software and driver
in the bundled CD, or go to
http://www.microsoft.com to
download the required fi les.
Please refer to "Copying fi les
to your computer".
Remove the driver and other
related programs. Follow
the installation steps in the
manual to re-install the driver.
Install the driver before plug-
ging in the USB cable.
Reconnect the camcorder to
TV correctly.
If you have any other
camcorder or capture device
installed in your computer,
please completely remove
the camcorder and its driver
from the computer to avoid
the confl ict.
Adjust the fl icker setting. For
more information, please
refer to the "Flicker Settings"
table.