Easypix DVC 5016 HD Mode D'emploi page 18

Troubleshooting
When using the camcorder:
Problem
The camcorder can not be
powered on normally.
Can not take pictures or
video clips when pressing the
Shutter or Record button.
The LCD screen displays
"MEMORY ERROR" or
"CARD ERROR" message.
Or the camcorder cannot
read the memory card.
I did not delete the pictures
and video clips, but can not
fi nd them in the memory card.
Cause
The battery is out of power.
The battery is incorrectly
installed.
Out of memory.
The camcorder is recharging
the fl ash strobe.
Using a "protected" SD card.
The format of the memory
card is not compatible with
the camcorder.
The memory card is cor-
rupted.
The lost recordings are saved
in the internal memory.
16
Solution
Replace the battery.
Re-install the battery.
Free some space from the
SD/MMC card or the internal
memory.
Wait until the fl ash strobe is
fully charged.
Set the SD card to be writ-
able.
Use the camcorder "Format"
function to format the card.
Replace the memory card
with a new one.
It happens when you insert
a memory card after taking
a few pictures or video clips.
You can access those fi les
after removing the memory
card.