Setting Backlight Time - LaMotte DC1500 Mode D'emploi

1. From the Editing Menu, press
or
Power Save.
2. Press
ENTER
Save.
3. Press
desired function.
4. Press
ENTER
display Storing.... for about 1
second and the meter will retun to
the Editing Menu.
 SETTING THE BACKLIGHT TIME
The backlight illuminates the display for enhanced viewing. The default setting is
10 seconds. If Button Control is chosen the backlight button on the key pad will
act as an on/off switch and the backlight will remain on or off when the meter is
being used. When one of the other settings — 10, 20 or 30 seconds — is chosen,
the display will be illuminated for the specifi ed amount of time after any button is
pressed. NOTE: The backlight feature uses a signifi cant amount of power. The longer
the backlight is on, the more frequently the battery will have to be charged if the
USB/Wall Adapter is not being used.
to scroll to Set
to select Set Power
or to scroll to
. The screen will
Editing Menu
Set Clock
Logging
Factory Setup
Set Power Save
12:00:00
Set Power Save
Disable
5 Minutes
15 Minutes
30 Minutes
12:00:00
Set Power Save
Disable
5 Minutes
15 Minutes
30 Minutes
12:00:00
Editing Menu
Set Clock
Logging
Factory Setup
Set Power Save
12:00:00
13
001/500
001/500
001/500
001/500