Logging Data; Factory Setup; Setting Power Save - LaMotte DC1500 Mode D'emploi

 LOGGING DATA
The default setting for the data logger is enabled. The meter will log the last 500
data points. The counter in the center bottom of the display will show how many
data points have been logged. The display will show 500+ when the data logger has
exceeded 500 points and the data points are being overwritten.
1. From the Editing Menu, press
or
Logging.
2. Press
ENTER
3. Press
desired function.
4. Press
ENTER
display Storing... for about 1
second and return to the Editing
Menu.
 FACTORY SETUP
The Factory Setup menu is used in manufacturing of the colorimeter. This menu is
not for use by the operator in the fi eld.
 SETTING POWER SAVE
The power saving Auto Shutoff feature will turn the meter off when a button has not
been pushed for a set amount of time. The default setting is disabled. To change the
setting:
to scroll to
to select Logging.
or to scroll to
. The screen will
Editing Menu
Set Clock
Logging

Factory Setup

Set Power Save
12:00:00
Display Test Log
Logging Enabled
Logging Disabled
Erase Log
12:00:00
Display Test Log
Logging Enabled
Logging Disabled
Erase Log
12:00:00
Editing Menu
Set Clock
Logging
Factory Setup
Set Power Save
12:00:00
12
001/500
Logging
001/500
Logging
001/500
001/500