Bartscher 100211 Mode D'emploi page 26

Dispensing
•
Depending on the setup, toasted products may be dispensed in two ways:
From the front, using the dispensing shelf
From the rear, using the toast catcher
•
If toast is to be dispensed at the front, close the opening in the rear wall of the unit
using the hook on the rear metal flap.
•
For rear dispensing of toast, the unit's rear metal flap must be placed inside the unit.
•
Ensure the unit's ON/OFF switch is located in the OFF position.
•
Connect the unit to a single power outlet.
•
After activation, the green power light will come on.
•
First, set the speed of the conveyor belt (knob at left, pos. 1-7) at the highest
(quickest) setting (setting 1), and set the unit's On/Off switch (knob at right) to
BREAD, and let the unit heat up for approx. 15 – 20 minutes.
Rear dispensing of toast
Front dispensing of toast
- 25 -