Installation Instructions - Cafe CVE Serie Manuel D'utilisation Et D'installation

Installation
Instructions
Questions? Visit our Website at: cafeappliances.com
In Canada, visit cafeappliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING
Built-in style models are top heavy, especially with
any doors open. These models must be secured with
the anti-tip floor bracket to prevent tipping forward,
which could result in death or serious injury. Read
and follow the entire installation instructions for
installing the anti-tip floor bracket packed with your
refrigerator.
IMPORTANT
•
and ordinances. Save these instructions for local
inspector's use.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer –
future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – Refrigerator Installation
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
TOOLS YOU MAY NEED
Adjustable Wrench
1/4 Outer Diameter
Compression Nut
and Ferrule (sleeve)
24
Tip Over Hazard.
—
Observe all governing codes
can vary
Water Line Installation
30 minutes
Ratchet/Driver
Pencil
Pliers
Level
Refrigerator
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorway,
removed.
• To remove the refrigerator doors, see the Installing
the Refrigerator section.
WATER SUPPLY TO THE ICEMAKER AND
DISPENSER
If the refrigerator has an icemaker, it will have to be
connected to a cold water line. A GE Appliances
water supply kit (containing tubing, shutoff valve,
fittings and instructions) is available at extra
cost from your dealer, by visiting our website at
cafeappliances.com/parts (in Canada at
cafeappliances.ca/parts).
1/8 1/4 &
Allen Wrenches
1/8 Drill Bit and
Electric or Hand Drill
Flat-Head Screwdriver
Phillips-Head Screwdriver
1/4 Nut Driver
Tape Measure
Torx T20, T25
49-1000329 Rev. 2