Control Elements - Hameg HM8015 Manuel

POWERMETER HM8015
VOLT AMP
1 2

Control elements

Display (7-Segment LEDs)
The digital display shows the measured value
with 5 digit resolution. The measured value
will be displayed with a decimal point and
polarity sign.
FUNCTION – LEDs
The LEDs show the selected measurement
function. The function is selected by pressing
and
und
Pushbuttons for the selection of the
measurement function (VOLT, AMP, WATT,
Var, VA, PF). The selected function is
indicated by the FUNCTION – LEDs
INPUT
OUTPUT
Input and output terminals (safety terminals
for 4 mm banana plugs)
The measuring circuit of the power meter Is
not connected to safety ground (earth) The 2
left terminals are marked as INPUT and have
to be connected with the power supply of the
test item. The test item itself has to be
connected to the 2 right terminals OUTPUT.
The shunt is protected by 2 fuses which are
not accessible from the outside.
FUNCTION
WATT Var VA PF
Made in Germany
3
.
C o n t r o l
VOLT AMP
Instruments
300 10
150 1.6
50 0.16
max
300
INPUT
max
300 Vp
6 4
Range - LEDs
The LEDs indicate the actual voltage (50 V,
150 V and 300 V) and current (0.16 A, 1.6 A
and 10 A) range. The range selection is
automatic.
Subject to change without notice
e l e m e n t s
F
Vp
F
OUTPUT
!
CAT II
5
29