Joie i-Gemm 2 Mode D'emploi page 12

2. Slide diagonal belt into the rear
guide.
38
3. Pull the vehicle shoulder belt to
fasten the infant carrier module
tightly and securely.
39
4. Level line on infant carrier module
must be level to the ground when
the infant carrier module is
installed.
40
!
Tension the vehicle safety belt as
much as possible, checking that
it is not loose or twisted.
21
38
!
39
40
!
After installing the infant carrier
module, always check that
the vehicle belts are routed
correctly and securely fastened
into the vehicle buckle.
41
5. The hood can be opened
completely to protect your child
from the sun uttermostly, just unzip
the hook, and then pull the hood
toward front.
42
41
42
22